Magnavox CMWD2206 A owner manual Connect, Copying a Video Tape, VCR Functions, Hint

Copying a Video Tape

Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.

(Back of TV)

(Back of another source) (Back of DVD/VCR*)

	DVD/VCR	VCR			DVD		DVD/VCR	VCR		2
	AUDIO OUT		ANT-IN	DIGITAL		VIDEO OUT
	AUDIO OUT				AUDIOS-VIDEO		AUDIO OUT
or		AUDIO IN	1		L	COMPONENT		AUDIO IN		Connect
	L			AUDIO OUT	OUTOUT	Y	L		ANT-IN
	R	VIDEO IN	Connect			CB	R
	VIDEO OUT		ANT-OUT	COAXIAL
	VIDEO OUT				R		VIDEO OUT	VIDEO IN	ANT-OUT
						CR
										RF cable

				(supplied)
	Audio/Video cables
			*Front input jacks are also available
	(commercially available)
1) Insert a pre-recorded tape into another VCR for playing.		Hint
2) Insert a tape with its record tab into this unit for recording.
		• For best results during dubbing, use the front panel controls whenever
3) Press [SPEED] on the remote control of the recording unit to
			possible. The remote control might affect another source’s operation.
select the desired recording speed (SP/SLP).
		• Always use video-quality shielded cables with RCA-type connectors.
4) Select the “L1” or “L2” position on the recording unit.
			Standard audio cables are not recommended.
• To use the input jacks on the back of this unit, select “L1”
		• You can use a video disc player, satellite receiver or other audio/video
position by pressing [0], [0], [1] on the remote			component with Audio / Video outputs.
control or [CHANNEL K/L] on this unit.		• “L1” or “L2” is found below the lowest memorized channel.
• To use the input jacks on the front of this unit, select “L2”			(Example: CH02)
position by pressing [0], [0], [2] on the remote		• “L2” input jacks are on the front of this unit.
control or [CHANNEL K/L] on this unit.

5)Press [RECORD] on the recording unit.

6)Begin playback of the tape in another source.

7)To stop recording, press [STOP/EJECT C A] on the record- ing unit, then stop playback of the tape in another source.

VCR Functions

14 EN