Magnavox CMWD2206 A VCR Functions, Playback, Other Operations, Counter Reset, Auto Rewind, Hint

VCR Functions

Playback

Before:

Turn on the TV and set it to channel 3.

• If channel 3 has been already occupied for broadcasting, see “RF Output Channel” section on page 6.

VCR

1	Insert a video cassette	2	To start playback
	into this unit.
			PLAY
3	To stop playback	4	To eject the cassette
			OPEN/CLOSE
	STOP		/EJECT

				4		1			Hint
									• When a tape without
			OPEN/CLOSE						record tab is inserted,
STANDBY-ON	SPEED	AUDIO	/EJECT						the unit will start
				STANDBY-ON					playback automatically.
1	2	3
									• Tracking will be
			SKIP/CH.	POWER ON
4	5	6				REC	TIMER REC		automatically adjusted
7	8	9	VCR/TV	VIDEO	AUDIO	REW F.FWD STOP/EJECT PLAY RECORD		IR	upon playback.
			SLOW
									To adjust the tracking
	0	+10
DISPLAY	VCR	DVD	PAUSE						manually, press [SKIP/
2						3 2			CH. G/K, H/L] (or
		PLAY							[CHANNEL K/L]) dur-
	STOP			3		4			ing playback.

Other Operations

To cue or review picture during playback (Picture Search)

Use [g] or [h]([F.FWD g] or [REW h]).

•Press it again and the unit will search in super high speed. (in the SLP mode only)

To freeze the picture on TV screen during playback (Still mode)

Press [PAUSE F]. Each time you press the button, the picture will be forwarded by one frame.

•If the picture begins to vibrate vertically in the still mode, stabilize the picture by using [SKIP/CH. G/K, H/L] (or [CHANNEL K/L]).

•If the picture is distorted or rolling vertically, adjust the vertical hold control on your TV if equipped.

Counter Reset

Press [CLEAR/C.RESET]

To play back in slow motion (Slow mode)

Press [SLOW] during playback or the still mode.

•If the noise bars appear on the TV screen, you can reduce it by using [SKIP/CH. G/K, H/L] (or [CHANNEL K/L]).

Auto Rewind

When a tape reaches its end during playback, fast-forward or record- ing (except Timer Recording and One Touch Recording), the tape will automatically rewind to the beginning. After rewinding finishes, the unit will eject the tape.

Hint

•Still/Slow mode will be automatically canceled after 5 minutes to prevent damage to the tape and the video head.

•To return to playback from the Picture Search/Still/Slow mode, press [PLAY B].

Index Search

You can skip the program backward and forward by the Index Mark.

VCR

• Insert a tape into this unit.

1 Press [SEARCH MODE] once.

SEARCH	INDEX SEARCH
MODE
	– –

2

To select Index Mark

INDEX

SEARCH

0 3

or

01 ~ 20

CURRENT PROGRAM

Beginning

End of

of the tape

the tape

Pro.1

Pro.2

Pro.3

Pro.4

Pro.5

02

01

01

02

03

INDEX MARK

3

To rewind

ss

To fast forward

BB

4

After searching, it automatically

PLAYB

starts playback.

Hint

•The Index Mark will be made automatically at the beginning of each recording.

•The time gap between Index Marks should be greater than 1 minute for SP mode, 2 minutes for LP mode and 3 minutes for SLP mode.

Time Search

You can search backward and forward a specific length of time

on a tape.

VCR

• Insert a tape into this unit.

1 Press [SEARCH MODE] twice.

SEARCH	TIME SEARCH
MODE
	– : – –

2	Select the desired length of time for fast forwarding or
	rewinding.
	TIME SEARCH
	2 : 5 0
	or
	0:01~ 9:59
	(1 minute~9 hours and 59 minutes)
3	To rewind
	ss
	To fast forward
	BB
4	After searching, it automatically starts playback.
	PLAYB

Hint for Index Search & Time Search

•These functions are not available during recording.

•Press [STOP C] to stop the search.

•If a tape ends during a search, your search will be canceled and the tape will rewind to the beginning.

VCR Functions

11 EN