![HIGH ALTITUDE INSTALLATION](/images/new-backgrounds/54231/5423125x1.webp)
OWNER’S MANUAL
VENTING INSTALLATION
Continued
HIGH ALTITUDE INSTALLATION
Your Vanguard
When installing this fireplace at an elevation above 2000 feet (in the USA), you may need to decrease the input rating by changing the existing burner orifice to a smaller size. Re- duce input 4% for each 1000 feet above sea level. Check with your local gas company for proper orifice size identification.
When installing this fireplace at an eleva- tion above 4500 feet (in Canada), check with local authorities.
Consult your local gas company to help de- termine the proper orifice for your location.
For assistance with any high altitude installa- tion contact DESA International’s Technical Service Department at
PARTS LISTS FOR VENTING KITS AND COMPONENTS
Note: Terminations are not designed for installation prior to transportation.
*NOTICE: The 7" x 30° Elbow sup- plied with kits CVK, BVK, SVK, and RVF cannot be used. IT MUST BE REPLACED WITH A 7" X 45°
STARTER ELBOW (D2060) PUR-
CHASED SEPARATELY.
Vanguard Rigid Venting
Number Description
*MDV9K 9' Vertical Vent Kit
Includes one each: 48" Pipe, 36"
Pipe, 24" Pipe, 30° Elbow,
Firestop, Roof Flashing, Storm
Collar, Flue Restrictor Disc, and
Vertical Termination Cap
*MDVGFK Ground Floor Horizontal Vent Kit (Allows horizontal installations that run 49.5" min. vertically and 15" horizontally from the back of the fire- place to the outside wall.)
Includes one each: 12" Pipe,
Vanguard Rigid Venting (Cont.) | Vanguard Rigid Venting (Cont.) | |||||
Number | Description |
| Number Description |
| ||
*CVK | Corner Vent Kit (also used for | D4000 | Roof Flashing | |||
| horizontal runs) | D4010 | Roof Flashing | |||
| Includes: 7" x 30º Elbow, 7" x 90º D4020 | Flex Connector (6 pcs.) | ||||
| Elbow, 7" Adjustable Galvanized | D4030 | Flex Wall Thimble (6 pcs.) | |||
| Pipe | |||||
| D4040 | 4" Hose Clamp (6 pcs.) | ||||
| Thimble, Horizontal Termination, | |||||
| RTV Silicone and 20 Screws | D4050 | 7" Hose Clamp (6 pcs.) | |||
*BVK | Basement Rigid Vent Kit | D5000 | Wood/Vinyl Siding Standoff | |||
| Includes: 7" x 30° Elbow, 7" x 4' |
| (6 pcs.) | |||
| Galvanized Pipe, 7" x 90° Elbow, 7" | Vanguard Flexible Venting | ||||
| ||||||
| Wall Thimble, Horizontal Termina- | Number Description |
| |||
| tion, RTV Silicone and 20 Screws | |||||
| FGFVK | Flex Ground Floor Vent Kit | ||||
*SVK | Snorkel Rigid Vent Kit | |||||
| Includes: Flex Adapter, 7" x 4' | |||||
| Includes: 7" x 30° Elbow, 7" x 4' |
| ||||
|
| Flexible Pipe, 4" x 4' Flexible Pipe, | ||||
| Galvanized Pipe, 7" x 90° Elbow, 7" |
| ||||
|
| Wall Thimble, Horizontal Termi- | ||||
|
| |||||
|
| nation, (4) Spacer Springs, (2) 4" | ||||
| Wall Thimble, 36" Snorkel Termi- |
| ||||
|
| Hose Clamps, (2) 7" Hose Clamps, | ||||
| nation, RTV Silicone and 28 Screws |
| ||||
|
| RTV Silicone, and 10 Screws | ||||
*RVF | Roof Rigid Vent Kit |
| ||||
D1040 | 7" x 25' Coaxial Flex Pipe | |||||
| Includes: Flue Restrictor, Storm | |||||
|
| with Spacer Springs | ||||
| Collar, 7" x 30° Elbow, 7" x 4' |
| ||||
| D3080 | Rectangular Horizontal | ||||
| Galvanized Pipe, 7" x 2' Galvanized | |||||
| Pipe,7"AdjustableGalvanizedPipe |
| Flex Termination Cap | |||
|
|
|
| |||
| SIMPSON | |||||
| Flashing, RTV Silicone, Vertical | |||||
| GS 4" x 6 5/8 " | |||||
| Termination, and 26 screws | |||||
D1000 | 7" x 12" Galvanized Coaxial | Number Description |
| |||
| Pipe (6 pcs.) | 902 | 7" x 48" Pipe | |||
D1010 | 7" x 24" Galvanized Coaxial | |||||
903 | 7" x 36" Pipe | |||||
| Pipe (6 pcs.) | |||||
| 904 | 7" x 24" Pipe | ||||
D1020 | 7" x 48" Galvanized Coaxial | |||||
906 | 7" x 12" Pipe | |||||
| Pipe (6 pcs.) | |||||
| 907 | 7" x 9" Pipe | ||||
D1030 | 7" Adjustable | |||||
908 | 7" x 6" Pipe | |||||
| GalvanizedCoaxialPipe(6pcs.) | |||||
| 911 | 7" Adjustable | ||||
D1050 | 7" x 6" Galvanized Coaxial | |||||
| Pipe (6 pcs.) | 940 | Wall Thimble | |||
D2000 | 7" x 90° Elbow (6 pcs.) | 941 | Cathedral Ceiling Support Box | |||
D2010 | 7" x 45° Elbow (6 pcs.) | 943 | Roof Flashing | |||
*D2060 | 7" x 45° Starter Elbow | 943S | Roof Flashing | |||
D3000 | WallStrap/OffsetSupport(6pcs.) | 945 | 7" x 45° Elbow | |||
D3010 | Storm Collar (6 pcs.) | 950 | Vinyl Siding Standoff | |||
D3020 | Wall Thimble (6 pcs.) | 953 | Storm Collar | |||
D3050 | Vertical Restrictor (6 pcs.) | |||||
963 | Ceiling Firestop | |||||
D3060 | Ceiling Firestop/Support | |||||
981 | 36" Snorkel Termination | |||||
| (6 pcs.) | |||||
| 984 | Horizontal Termination Vent Cap | ||||
D3070 | Rectangular Horizontal Rigid | |||||
988 | Wall Strap | |||||
| Vent Termination Cap | |||||
| 990 | 7" x 90° Elbow | ||||
D3071 | Adjustable Horizontal Rigid | |||||
| Vent Termination Cap | 991 | Vertical High Wind Termination | |||
D3090 | Cathedral Ceiling Support Box |
|
|
|
*The D2060 45° starter elbow must be purchased separately.
106442 | 13 |