Magnavox CMWV405 Preparation for Use, To Select a Channel, To Preset the Channel Again

3. Preparation for Use

Turn on the Unit for the First Time

To Add/Delete Channels

Clock Set Up

1Turn on the TV and set it to channel 3.

•If channel 3 is already occupied for broadcasting, see “RF Output Channel” section on page 1.

To Select a Channel

You can select a channel by using the Number buttons on the remote control.

Notes for using the Number buttons:

• When selecting cable channels

which are higher than 99, enter

channel numbers as a three-digit

1 MENU - M E N U -

TIMER PROGRAMMING

AUTO REPEAT [OFF]

B CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

STOP PLAY

or

1	MENU		- M E N U -
			TIMER PROGRAMMING
			AUTO REPEAT [OFF]
			CHANNEL SET UP
			B CLOCK SET
			LANGUAGE SELECT
	STOP	PLAY

or	• If the clock is not set,
	the CLOCK SET screen

5			CLOCK SET
STOP	PLAY	MONTH DAY		YEAR
		1 0	/ 0 2 MON 2 0 0 6
	or	HOUR MINUTE		AM/PM
		0 5	: – –	– –
		Select the current hour.

2	STANDBY-ON		Remote Control	TV Screen
			LANGUAGE SELECT
			B ENGLISH	[ON]
	STOP	PLAY	FRANCAIS
			ESPAÑOL
		or
			F.FWD

number (for example: 117, press

[1], [1], [7]).

• You must precede single-digit

channel numbers with a zero (for

example: 02, 03, 04 and so on).

To Preset the Channel Again

1)	Press [MENU] until the main
	menu appears.
2)	Select "CHANNEL SET UP" by
	pressing [PLAY B] or [STOP C].
	Then, press [F.FWD g].

2

STOP PLAY

or

F.FWD

CHANNEL SET UP

AUTO SET UP

B MANUAL SET UP

appears when you press

[MENU]. In this case, go

to step 2.

		F.FWD
2		CLOCK SET
STOP	PLAY	MONTH DAY	YEAR
		1 0 / – –	– – – –
	or	HOUR MINUTE	AM/PM
		– – : – –	– –

F.FWD

6			CLOCK SET
STOP	PLAY	MONTH DAY		YEAR
		1 0	/ 0 2 MON 2 0 0 6
	or	HOUR MINUTE		AM/PM
		0 5	: 4 0	– –
		Select the current minute.
			F.FWD

3	F.FWD	CH 01
		AUTO SET UP

3) Select "AUTO SET UP" by

pressing [PLAY B] or [STOP C].

Then, press [F.FWD g]. After

scanning, the tuner stops on the

lowest memorized channel.

	F.FWD
3	MANUAL SET UP

Select the current month.

F.FWD

3

7			CLOCK SET
STOP	PLAY	MONTH DAY		YEAR
		1 0	/ 0 2 MON 2 0 0 6

Do you connect the cable from the cable box or the satellite box to the VCR’s ANT-IN jack?

Yes

Yes Press [MENU]

to exit.

To Change the On-Screen Language

1)	Press [MENU] until the main
	menu appears.
2)	Select "LANGUAGE SELECT" by
	pressing [PLAY B] or [STOP C].

STOP

or

PLAY

CHANNEL 30 (CATV)

ADD

Select the channel to be added or deleted.

			CLOCK SET
STOP	PLAY	MONTH DAY		YEAR
		1 0	/ 0 2	– – – –
	or	HOUR MINUTE		AM/PM
		– –	: – –	– –

Select the current day.

F.FWD

or	HOUR MINUTE	AM/PM
	0 5 : 4 0	P M AM
		BPM
	Select “AM” or “PM”.

• Refer to “Hint for Cable Box or	No
Satellite Box” section on page 1.

No Please wait for a few minutes.

After scanning...

•The tuner stops on the lowest memorized channel.

•You can select only the channels memorized

in the unit by using [CHANNEL ].

•If "AUTO SET UP" appears on the TV screen again, check the cable connections. Then, press [F.FWD g] once again.

Hint

•Repeat these steps only if either there was a power failure or if this unit has been unplugged for more than 30 seconds.

Then, press [F.FWD g].

3) Select "ENGLISH", "FRANCAIS"

or "ESPAÑOL" by pressing

[PLAY B] or [STOP C]. Then,

press [C.RESET/EXIT].

Hint

•If you accidentally select Spanish or French and need English: Press [MENU] and choose SELEC. IDIOMA, or SELECTION LANGUE. Press [F.FWD g] and select ENGLISH. Finally, press [C.RESET/EXIT].

4		MANUAL SET UP
REW	F.FWD	CHANNEL 30	(CATV)
		DELETE
	or
		Select “ADD” or “DELETE”.

5 To exit the	EXIT
	C.RESET
menu
-	-

4			CLOCK SET
STOP	PLAY	MONTH DAY		YEAR
		1 0	/ 0 2	2 0 0 6
	or	HOUR MINUTE		AM/PM
		– –	: – –	– –
		Select the current year.
		F.FWD

8 To exit the

CLOCK SET screen

F.FWD

Hint

•To go back one step, press [REW h] (during steps 2 to 7).

•Your clock setting will be lost if either there is a power failure or if this unit has been unplugged for more than 30 seconds.

EN