Magnavox DV220MW9 owner manual Informationi I N, Maintenance, Specifications

INFORMATIONI I N

Maintenance

PRECAUTIONS

Servicing

•Please refer to relevant topics on the “Troubleshooting Guide” on page 26 before returning the product.

•If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug, and please call our toll free customer support line found on the cover of this manual to locate an authorized service center.

Cleaning the Cabinet

•Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.

Cleaning Discs

•When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.

•Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.

Cleaning the Disc Lens

•If this unit continues to perform improperly even after you have referred to the relevant sections and to the “Troubleshooting Guide” in this manual, the laser optical pickup unit may be dirty. Consult your dealer or an authorized service center for inspection and cleaning of the laser optical pickup unit.

Disc Handling

•When you handle a disc, hold it by its edge and try not to touch the surface of the disc.

•Always store the disc in its protective case when not in use.

•Do not glue paper or put stickers onto the disc. This may damage the disc, and the unit may not read it correctly.

Auto Head Cleaning

•Automatically cleans video heads as you insert or remove a cassette tape, so you can see a clear picture.

•If the playback picture is blurred or interrupted while the TV broadcast is showing clear, the dirt may have accumulated on the video heads, or the usage of rental or worn cassette tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your unit may need to be cleaned.

1.Please visit your local audio/video store and purchase a good quality VHS video head cleaner.

2.If a Video head cleaner does not solve the problem, please call our toll free customer support line found on the cover of this manual to locate an authorized service center.

Note: • Remember to read the instructions along with the video head cleaner before use.

• Clean video heads only when problems occur.

IR Signal Check

•If the remote control does not work properly, you can test if the remote control is sending out the infrared signal with AM radio or a digital camera (including built- in camera of cellular phone). It will help to define the cause of malfunction.

• With an AM radio:

Tune an AM radio to a station with no broadcasting. Press a button on remote control toward the radio. Sound will be fluttering when you press any key and the radio receives the signal. This means the remote control is working.

•With a digital camera (including built-in camera of cellular phone):

Direct a digital camera to remote control, press and hold a button on remote control. If infrared light appears through digital camera, the remote control is working.

PREPARATION BASIC OPERATIONS ADVANCED PLAYBACK RECORDING OPTIONAL

Specifications

SETTINGS

	Output signal format:	NTSC color
	Video heads:	Rotary four-head
	Tape width:	1/2 inch (12.65mm)
	Tape speeds:	SP:	1-5/16 inch/sec. (33.40mm/sec)
		LP:	16.67mm/sec.
		SLP:	7/16 inch/sec. (11.12mm/sec.)
	Disc media size:	5 inches (12 cm) / 3 inches (8 cm)
	Terminals:
	Component video output:	RCA jack x 3
		Y:	1Vp-p (75Ω)
		Pb:	700mVp-p (75Ω)
	S-video output:	Pr:	700mVp-p (75Ω)
		Mini DIN 4-pin jack x 1
		Y:	1Vp-p (75Ω)
	Video output:	C:	286mVp-p (75Ω)
		RCA jack x 1		1Vp-p (75Ω)
	Coaxial digital audio output	RCA jack x1		500mVp-p (75Ω)
	Audio output:	RCA jack x 4		2V rms
EN	Video input:	RCA jack x 2		1Vp-p (75Ω)
	Audio input:	RCA jack x 2		2V rms

Recommended circumstances of recording MP3 files:

Sampling frequency:	44.1kHz or 48kHz
Constant bit rate:	32kbps ~ 320kbps
Remote control:	Digital encoded infrared light system
Operating temperature: 41°F (5°C) to 104°F (40°C)
Power requirements:	120V AC +/- 10%, 60 Hz +/- 0.5%
Power consumption (maximum):			(standby: 3.8W)
	21W
Dimensions:	W:	17 3/16”	(435mm)
	H:	3 3/4”	(94mm)
	D:	9 3/16”	(233mm)
Weight:	Approx. 5.8lbs		(2.6kg)

•Designs and specifications are subject to change without notice.

•If there is a discrepancy between languages, the default language will be English.

TROUBLESHOOTING INFORMATION

27