Magnavox DV220MW9 Optionalopti Settingsttings, Changing the DVD Settings in the setup menu

OPTIONALOPTI SETTINGSTTINGS

Changing the DVD Settings (in the setup menu)

In the setup menu, you can customize the various kinds of settings as you prefer.

Refer to the following instructions to navigate through the setup menus.

1)Press [SETUP].

2)Use [s / B] to select a setup item.

3)Use [K/ L] to go up or down in the menu list.

4)Press [OK] to access the sub contents of the highlighted item.

5)Use [K/ L] to select a setting.

6)Press [SETUP] to exit.

•The following table is the contents which you can set and the default settings. Refer to the table for useful operation.

•Your change to each setting stays on even when the unit is turned off.

	Setup menu (highlight is the default)			Contents	Notes
		AUDIO		Set the language for	• Language options are not available with some discs.
			ORIGINAL
				audio.	• Only the languages supported by the disc can be selected.
			ENGLISH
			FRENCH		• “LANGUAGE” setting for “AUDIO” and “SUBTITLE” are not
			SPANISH		available with some discs. Then use [AUDIO ] and [SUBTITLE].
			•		Refer to page 19.
			•
			•
			OTHER
		SUBTITLE		Set the language for
			OFF
	LANGUAGE		ENGLISH	subtitles.
			FRENCH
			SPANISH
			•
			•
			•
			OTHER
		DISC MENU		Set the language for
			ENGLISH
				disc menu language.
			FRENCH
			SPANISH
			•
			•
			•
			OTHER
		PLAYER MENU		Set the language for
			ENGLISH
				OSD (on-screen
			FRANÇAIS
				display).
			ESPAÑOL
		TV ASPECT		Set the picture size	• Select “4:3 LETTER BOX” so that black bars may appear on the
			4:3 LETTER BOX
				according to aspect	top and bottom of the TV screen.
			4:3 PAN & SCAN
			16:9 WIDE	ratio of your TV.	• Select “4:3 PAN & SCAN” for a full height picture with both sides adjusted.
					• Select “16:9 WIDE” if a wide-screen TV is connected to this unit.
	DISPLAY	STILL MODE		Set the type of still	• “AUTO” automatically selects the best resolution setting
			AUTO
				image in pausing	(“FRAME” or “FIELD”) based on the data characteristics of the
			FIELD
				playback.	pictures. Some pictures may be blurred when you select “AUTO”
			FRAME
				Select “AUTO”	in the still mode due to their data characteristics.
				usually.	• An individual picture on the TV screen is called a “frame”, which
					consists of two separate images called as “field”.
					• If you select “FIELD”, the picture in the still mode will be
					stabilized. If you select “FRAME”, the picture in the still mode will
					be highly defined.
		DRC		Set to “ON” to	• This function is available only on the discs which are recorded in
			ON
		(Dynamic Range Control)		compress the range	the Dolby Digital format.
			OFF
				between soft and
				loud sounds.
		DOWN SAMPLING		Set to “ON” when	• When playing back a 96kHz disc with the copyright protection, or
	AUDIO		ON
				outputting the	• This function is available only on digital outputting of a disc
			OFF	outputting in 48kHz.	when virtual surround is set to “1” or “2”, the sound will be down
				Set to “OFF” when	sampled at 48kHz even if the “DOWN SAMPLING” is set to “OFF”.
				original sound.	recorded in 96kHz.
		DOLBY DIGITAL		Set the type of sound	• Select “PCM” when the unit is connected to a 2ch digital audio
			BITSTREAM
				signal which outputs	device.
			PCM
				from the digital	• Select “BITSTREAM” when the unit is connected to a Dolby
				audio output jack.	Digital decoder.
		PASSWORD		Enter the password.
	PARENTAL		NO
			LEVEL1 [KID SAFE]
			YES
		LEVEL	LEVEL8 [ADULT]	Set the parental level for DVD playback. (Refer to page 24.)
			LEVEL7 [NC-17] to
		CHANGE		Set and change the password. (Refer to page 24.)
		ANGLE ICON		Set whether to display the angle icon or not.
	OTHERS		ON
			OFF
		AUTO POWER OFF		Set to “ON” to turn off this unit automatically after 30 minutes of no use.
			ON
EN			OFF

PRECAUTIONS PREPARATION BASIC OPERATIONS ADVANCED PLAYBACK RECORDING OPTIONAL SETTINGS TROUBLESHOOTING INFORMATION

23