INTRODUCTION
Front Panel
1 | 2 | 3 | 4 5* | 6 | 7 | 8 |
17 | 16 15 14 13 | 12 | 11 10* | 9 |
(*) The unit can also be turned on by pressing these buttons or inserting a cassette tape.
EN
1.QSTANDBY/ON button
•Press to turn on the unit, or to turn the unit into the standby mode. (To completely turn off the unit, you must unplug the AC power cord.)
•Press and hold for 10 seconds to shut down the unit.
2.C STOP/EJECT A button (TAPE)
•When the unit is in stop mode, press to remove the cassette tape from the cassette compartment.
•Press to stop cassette tape playback.
3.Cassette compartment (TAPE)
•Insert a cassette tape here.
4.SOURCE button
•Press to select the component you wish to operate.
5.A OPEN/CLOSE button*
•Press to open or close the disc tray.
6.TAPE indicator
•Lights up when TAPE mode is selected.
7.DISC indicator
•Lights up when DISC mode is selected.
8.Disc tray
•Place a disc when opening the disc tray.
9.SD card slot
•Insert an SD Memory Card and play back the contents in it.
10.B PLAY button* (DISC)
•Press to start or resume playback.
11.C STOP button (DISC)
•Press to stop playback.
12.TRACKING
•Press to adjust the tracking manually.
13.Infrared sensor window
•Receive signals from your remote control so that you can control the unit from a distance.
14.B PLAY button (TAPE)
•Press to start a playback of a cassette tape.
15.D F.FWD button (TAPE)
•Press to rapidly advance the cassette tape, or view the picture rapidly in forward during playback (forward search).
16.E REW button (TAPE)
•Press to rewind the cassette tape, or to view the picture rapidly in reverse during playback (rewind search).
17.QSTANDBY/ON indicator
•Lights up when the power is in the standby mode.
INTRODUCTION CONNECTIONS PLAYBACK
Selecting DISC or TAPE Operation
You must first select either DISC or TAPE operation. |
| |
DISC mode |
| |
Press [DISC]. |
| |
(The DISC indicator will illuminate.) |
| |
TAPE mode | TAPE indicator | |
DISC indicator | ||
Press [TAPE]. | ||
| ||
(The TAPE indicator will illuminate.) | DISC button | |
| ||
| TAPE button | |
| SOURCE button |
Note
• Playback will stop when you change the output mode.
FUNCTION SETUP VCP FUNCTIONS OTHERS
EN | 7 |