PLAYBACK
Adjusting the Picture
Virtual Surround
You can adjust the picture quality.
1During playback, press [MODE] repeatedly until ““ appears.
2Use [K / L] to select your desired item, then use [0 / 1] to adjust the setting.
|
| Black Level | On |
|
| Noise Reduction | Off |
|
|
|
|
e.g.)
■Black level
You can adjust the black level setting to make the black parts of the pictures as bright as you prefer. You can select “On” or “Off”.
“On” :Makes the dark parts brighter.
“Off” :Shows the original picture as recorded.
■Noise reduction (DVD-video only)
Reduces the noise of the playback picture.
“Off” :Shows the original picture as recorded.
“1” :Executes 3D noise reduction which detects and deletes the noise by comparing each picture frame.
“2” :Executes MPEG noise reduction which reduces the block noise and mosquito noise on the movie subtitle.
“3” :Executes both MPEG noise reduction and 3D noise reduction.
3Press [RETURN] to exit.
Note
•The setting will remain the same even if the unit is turned to the standby mode.
•For the picture output from HDMI OUT jack, “Black Level” is not effective.
•You cannot adjust the setting during rapid playback.
You can enjoy stereophonic virtual space through your existing 2 channel stereo system.
1During playback, press [MODE] repeatedly until “ ” appears.
2Use [K / L] to select your desired setting.
Off
“Off” :No surround effect “1” :Natural surround effect “2” :Stronger surround effect
3Press [RETURN] to exit.
Note
•Set the virtual surround setting to “Off” or lower the volume if the sound is distorted.
•Virtual surround does not function during rapid playback.
•For the virtual surround, audio signal will always be
PIP (BONUSVIEW) Setting
Some
Refer also to the “Note” on the next page.
primary video
secondary video
1During playback, press [MODE] repeatedly until the PIP function appears.
2Use [K / L] to select the secondary video you want.
•The secondary video will be displayed and the secondary audio will be output.
•Use [0 / 1] to switch between current setting and “Off”.
3Press [RETURN] or [MODE] to remove the PIP information.
26 | EN |