Magnavox MBP110V/F7 owner manual Switching Subtitles Switching Audio Soundtrack

PLAYBACK

You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back.

Switching Subtitles

Switching Audio Soundtrack

Some video materials may have subtitles in 1 or more languages. For commercially available discs, the supported languages can be found on the disc case. Follow the steps below to switch the subtitle language during playback.

When playing back video material recorded with 2 or more soundtracks (these are often in different audio languages or audio formats), you can switch them during playback.

For BD, available audio varies depending on “BD Audio Mode” setting. Refer to page 31 for more information.

1During playback, press [SUBTITLE].

2Use [K / L] to select “Primary Subtitle”, “Secondary Subtitle” or “Subtitle Style”, then press [OK].

	Primary Subtitle	2 ENG/11
	Secondary Subtitle	2 ENG/11
	Subtitle Style	2/25
“Primary Subtitle”		: Sets the subtitle for the
		primary video.
“Secondary Subtitle”		: Sets the subtitle for the
		secondary video.
“Subtitle Style”		: Sets style of the subtitle.

3Use [K / L] to select your desired subtitle or style.

•Use [0 / 1] to switch between current subtitle setting and “Off”.

4Press [SUBTITLE] to exit.

1During playback, press [SUBTITLE].

2Use [K / L] to select your desired subtitle.

1 ENG / 4

•Use [0 / 1] to switch between current subtitle setting and “Off”.

3Press [SUBTITLE] to exit.

Note

•Some discs will only allow you to change the subtitles from the disc menu or pop-up menu. Press [TOP MENU] or [POP MENU/MENU] to display the disc menu or pop-up menu.

•If 4-digit-language code appears in the subtitle menu, refer to “Language Code List” on page 44.

•If the disc has no subtitle language or subtitle style, “Not Available” will be displayed on the TV screen.

•During playback of the secondary video, the primary subtitle setting is not available except when there is no subtitle for the secondary video.

•If you select a language that has a 3-letter-language code, the code will be displayed every time you change the subtitle language setting. If you select any other languages, “---” will be displayed instead. (Refer to page 44.)

1During playback, press [AUDIO].

2Use [K / L] to select “Primary” or “Secondary” audio to set, then press [OK].

Primary

1	ENG	Dolby D	Multi-ch	/3
Secondary
2	ENG	Dolby D+	Multi-ch	/3

“Primary” : Sets the audio for the primary video.

“Secondary” : Sets the audio for the secondary video.

3Use [K / L] to select your desired audio stream channel.

•For “Secondary”, use [0 / 1] to switch between current audio setting and “Off”.

4Press [AUDIO] to exit.

28 EN