Memorex MCD4300BT Using The Base Page Button Using The Flash Button, Tone/Pulse Switch

MCD4300BT.2002.O/M.QXD 4/19/02 9:57 AM Page 16

BASIC OPERATION (CONTINUED)

USING THE BASE PAGE BUTTON USING THE FLASH BUTTON

1 1

Press the PAGE button on the base to locate all handsets when not in use; all handsets will ring. Press again to end the paging feature. Press any button on the handset to end paging.

If none of the handsets pick up in two minutes, the paging will stop.

Press the FLASH button to momentarily hang up. This is useful for custom calling features, such as Call Waiting or Three- Way Calling provided by your local phone company. When using for call waiting, simply press to answer the call waiting call. Press again to reconnect with the original caller.

TONE/PULSE SWITCH

1

USING THE TONE BUTTON

Slide the T/P switch to TONE or PULSE to match the service provided on your telephone line. If you are not sure of your service, please contact your telephone company. The factory preset position for this switch is TONE.

CALL WAITING

1

1

If you are in a Pulse dialing area you may still take advantage of touch-tone services after dialing to respond to touch-tone prompts. To do this, press the */TONE button to temporarily change the dialing mode from Pulse to Tone after dialing in the Pulse mode. This will enable Pulse users to access touch-tone services. It will revert back to Pulse after hanging up.

16

If you subscribe to Call Waiting through your local phone company, and you receive another phone call, the phone will alert you with a beep and the display will show the name and number. Simply press the FLASH button to answer the new call. Press the FLASH button again to return to the original call. Call Waiting Caller ID also needs to be subscribed to in order to see the new caller’s name/ number on the display if you are already on the phone.