MCD4300BT.2002.O/M.QXD 4/19/02 9:57 AM Page 9
SET-UP INSTRUCTIONS (CONTINUED)
SETTING THE TIME
It may be necessary to set the internal clock time of the phone to display the time in the Caller ID display when incoming calls are received. If you subscribe to Caller ID, the time is automatically set when the first call is received. If the time is not automatically set, follow the steps below:
1 | 12/14 | 10:25AM | 1717 |
1.MEMORY 2.SET UP 3.RINGER 4.VOLUME
2 | 12/14 | 10:25AM | 1717 |
1.MEMORY |
| ||
2.SET UP |
| ||
3.RINGER |
| ||
4.VOLUME |
|
1 2
Press the MENU button; the Menu will appear in the display.
Using the CID JOG control ❶, scroll down to select “2. SET UP” and press the CID JOG control ❶, or simply press the “2” button ❷; the SET UP Menu will appear in the display.
1.AREA CODE
3 2.EXTENSION 3.CONTRAST 4.TIME 5.ALARM
1
2
Using the CID JOG control ❶, scroll down to select “4. TIME” and press the CID JOG control ❶, or simply press the “4” button ❷; the TIME SET screen (HH:MM) will appear in the display.
4 2
1
Using the Key buttons
5
6
Using the CID JOG control, scroll to select AM or PM, then press the CID JOG control. A long beep will be heard and the time will now be set.
If a mistake is made, simply press the CLEAR button.
NOTES:
•It may take about one minute to update the time screen after the time setting.
•The time will reset to “00:00 when returned to the base, but will reset to the current time after approximately one minute.
9