Memorex MCD4300BT operating instructions Transferring a Call, Three WAY Conference Calling

MCD4300BT.2002.O/M.QXD 4/19/02 9:57 AM Page 29

ADVANCED FEATURES (CONTINUED)

TRANSFERRING A CALL

Transfer a call to another handset (this example shows Handset 1 transferring to Handset 2) as follows:

1

When speaking with an outside call, press the TRANS button on the handset; the party on the line will be put on hold; the display will show

“TRANSFERRING ENTER EXTENSION”.

22

1

Using the Key buttons (1-7) ❶, enter the desired handset number, Handset 1 (HS1) display will show “TRANSFERRED 2”. Press the TALK ❷ button on HS2 to pick up the transfer. HS1 display will then show

“PAGING EX:2, PRESS FLASH FOR CONFERENCE” and HS1 and HS2 will be connected, but the outside call will be on hold. Press the TALK button ❷ on HS1 to transfer the call and hang up. If HS2 does not pick up within 30 seconds, the transfer will be cancelled.

NOTES:

•Handsets must be registered to be able to transfer a call.

•You can cancel the transfer by pressing the TRANS button again before the other handset picks up the call.

THREE WAY CONFERENCE CALLING

Use the conference call feature to be able to speak with the party who is on the phone, as well as another handset as follows:

1

21 2

When speaking with an outside call, press the TRANS button on the handset; the party on the line will be put on hold.

Using the Key buttons (1-7) ❶, enter the desired handset number. When the other handset picks up, press the FLASH button ❷ and both handsets, as well as the party on the line will be in conference call.

NOTES:

•Handsets must be registered to be able to use conference calling.

•Handsets are available separately.

29