Memorex MCD4300BT Using The Software Continued, Click on “MIDI” from the menu

MCD4300BT.2002.O/M.QXD 4/19/02 9:57 AM Page 33

USING THE SOFTWARE (CONTINUED)

5.On the right-hand side of your window you will see the following: “MIDI FILES [HANDSET]”, and below that you will see three sets of numbers. For example: 321 421 214

These numbers are the three “MIDI FILES” that are currently on your phone. You can only change these three MIDI files. The Bluetooth phone comes with five MIDI files. However you CANNOT change tone number one, and tone number two on your Bluetooth phone.

6.Click on “MIDI” from the menu.

7.Click on “Add MIDI files”; an “Open” dialogue box will appear. Now go to the directory where you unzipped the MIDI file(s) to. The default directory for files downloaded off the Bluetooth page is “c:\bluetooth_tones”

8.Highlight the MIDI file(s) you wish to import and click “OPEN”

9.Your MIDI files should now appear in the “MIDI FILES (SYSTEM)” section of PhoneAPP.

10.Highlight one of the MIDI files that you downloaded, listed under “MIDI FILES (SYSTEM)”.

11.Go across to “MIDI FILES (HANDSET)” and highlight any one of the three files that you wish to replace.

12.Click “MOVE”.

13.The file you downloaded is now transferred to the “MIDI FILES (HANDSET)” and is now on your Bluetooth phone, but in order to keep these settings you must save the changes you have made by clicking the “Save All” button.

14.You can now close the application and unplug your phone from the USB cable.

33