MCD4300BT.2002.O/M.QXD 4/19/02 9:57 AM Page 6
INSTALLATION INSTRUCTIONS
1.Carefully unpack and remove your unit from the box.
2.Make sure all the items have been included:
• | Base Unit |
| Short) |
• | Handset Unit | • | Wall Mount Adapter |
• Rechargeable | • | Belt Clip | |
• | AC Adapter | • | Software CD |
•Two Telephone Cords (Long and
3.Make sure the Rechargeable Battery is installed or install the Rechargeable Battery as described on the next page.
PLEASE REFER TO THE FOLLOWING DIAGRAM FOR STEPS 4 THROUGH 7:
4.Slide the T/P switch to TONE or PULSE to match the service provided on your telephone line. If you are
not sure of your service, please contact your telephone company. The factory preset position for this switch is TONE.
5.Connect the telephone line cord into a modular telephone jack.
6.Insert the small plug at the end of the AC adapter into the DC power jack located at the bottom of your unit.
NOTE: Use only the AC adapter provided with your unit.
7.Plug the AC adapter into a standard 120V AC wall outlet.
TO WALL MOUNT THE UNIT, SEE PAGE 8.
P/T (PULSE/
TONE) SWITCH
AC ADAPTER
TO AC
OUTLET
TELEPHONE LINE CORD
IMPORTANT
The instructions given on pages 6 through 8 are for connection with the Caller ID Cordless Telephone and the supplied Base. If connecting additional handsets (up to seven can be connected), you will need to refer to the additional handset’s manual. The operation and features on how to use this telephone in conjunction with additional handsets, see this manual.
6
