Memorex MCD4300BT 11 2, Basic Operation, Placing A Call, Ending A Call, Using The Redial Button

MCD4300BT.2002.O/M.QXD 4/19/02 9:57 AM Page 14

BASIC OPERATION

PLACING A CALL

1

1

2

2

After the battery has been fully charged, press the Key buttons (0-9) ❶ for the phone number you wish to call.

NOTE: Press the REDIAL button ❷ to insert a pause. A pause is a two second interval between numbers.

NOTE: When dialing a number, the other buttons (except TALK, CLEAR and the Key buttons) will not work. To use these other buttons, or to cancel the entering of the telephone number, simply press and hold the CLEAR button for two seconds.

Press the TALK button to dial the number you entered. You can also press the TALK button first and then dial the number.

The display will show the amount of time you have been on the phone.

ENDING A CALL

1

To end a call, simply return the handset to the base, or press the TALK button on the handset.

USING THE REDIAL BUTTON

11

2

Press the TALK button ❶, followed by the REDIAL button ❷ to automatically redial the last number dialed on this handset. You can also press the REDIAL button ❷ first, and then the TALK button ❶.

NOTE: Please note that only the last number you called on this handset can be stored in the Redial memory.

14