HP 6515b manual Display assembly, Keyboard see Keyboard on Switch cover see Switch cover on

Display assembly

Description	Spare part number
14.1-inch, WXGA+ display assembly for use only with HP Compaq 6515b computer models with	443895-001
WWAN capability
14.1-inch, WXGA+, BrightView display assembly for use only with HP Compaq 6515b computer	443894-001
models without WWAN capability
14.1-inch, WXGA+ display assembly for use only with HP Compaq 6515b computer models without	443893-001
WWAN capability

Before removing the display assembly, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 46).

5.Remove the memory/WLAN module compartment cover (see Expansion memory module on page 54).

6.Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 56).

7.Remove the following components:

a.Keyboard (see Keyboard on page 62)

b.Switch cover (see Switch cover on page 68)

Remove the display assembly:

1.Disconnect the display panel cable (1) from the system board.

2.Remove the wireless antenna cables (2) from the routing channels and clips built into the top cover.

Component replacement procedures 75