HP 6515b manual Security menu

Security menu

Select	To do this
Setup password	Enter, change, or delete a setup password.
Power-On password	Enter, change, or delete a power-on password.
Password options	● Enable/disable stringent security.
	● Enable/disable password requirement on computer restart.
DriveLock passwords	● Enable/disable DriveLock on any computer hard drive and on optional
	MultiBay hard drives.
	● Change a DriveLock user password or master password.
	NOTE: DriveLock settings are accessible only when you enter Computer Setup
	by turning on (not restarting) the computer.
Smart Card security	Enable/disable support for smart card and Java™ Card power-on authentication.
	NOTE: Power-on authentication for smart cards is supported only on computers
	with optional smart card readers.
	NOTE: You must have an administrator password to change this setting.
TPM Embedded Security	Enable/disable support for Trusted Platform Module (TPM) Embedded Security,
	which protects the computer from unauthorized access to owner functions
	available in Embedded Security for ProtectTools. For more information, refer to
	the ProtectTools Help.
	NOTE: You must have a setup password to change this setting.
System IDs	Enter user-defined computer asset tracking number and ownership tag.
Disk Sanitizer	Run Disk Sanitizer to destroy all existing data on the primary hard drive. The
	following options are available:
	● Fast: Runs the Disk Sanitizer erase cycle once.
	● Optimum: Runs the Disk Sanitizer erase cycle 3 times.
	● Custom: Allows you to select the desired number of Disk Sanitizer erase
	cycles from a list.
	CAUTION: If you run Disk Sanitizer, the data on the primary hard drive is
	destroyed permanently.

Computer Setup menus 97