Computer feet

The computer feet are adhesive-backed rubber pads. The feet are included in the Plastics Kit, spare part number 443905-001. There are 8 feet in 2 different sizes. The feet attach to the base enclosure in the locations illustrated below.

Bluetooth module

NOTE: A Bluetooth module cable is not included in the Bluetooth module spare part kit. This cable is included in the Cable Kit, spare part number 443887-001.

Description

Spare part number

 

 

For use in all countries and regions except Japan and Asia/Pacific

398393-002

 

 

For use in Japan and Asia/Pacific countries and regions

450066-001

 

 

Before removing the memory module, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 46).

Remove the Bluetooth® module:

1.Position the computer with the front toward you.

2.Loosen the Phillips PM2.0×5.0 screw (1) that secures the Bluetooth module compartment cover to the computer.

52 Chapter 4 Removal and replacement procedures

Page 60
Image 60
HP 6515b manual Computer feet, Bluetooth module