Internal memory module
Description | Spare part number |
|
|
|
|
|
|
|
|
Before removing the internal memory module, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 46).
5.Remove the memory/WLAN module compartment cover (see Expansion memory module on page 54).
6.Release the keyboard (see Keyboard on page 62).
Remove the internal memory module:
1.Spread the retaining tabs (1) on each side of the memory module slot to release the memory module. (The edge of the module opposite the slot rises away from the computer.)
2.Remove the memory module (2) by pulling the module away from the slot at an angle.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect installation into the memory module slot.
Reverse this procedure to install the internal memory module.