Magnavox MDV460 Before you start, Press, To deactivate Progressive Scan manually

Getting Started (continued)

Step 3 : Setting up Progressive Scan feature

(for Progressive Scan TV only)

The progressive scan displays twice the number of frames per seconds than interlaced scanning (ordinary normal TV system). With nearly double the number of lines, progressive scan offers higher picture resolution and quality.

Before you start...

–Ensure that you have connected this DVD player to a progressive scan TV using the Y Pb Pr connection (see page 10).

–Ensure that you have completed the basic installation and set-up.

ATurn on your TV and set to interlace mode (refer to your TV user manual).

BPress STANDBY ON 2 on the remote control to turn on the DVD player.

CSelect the correct video-in channel.

The DVD background menu appears.

DPress SETUP.

E Press	to select { Video }, then
press .
Language	AspectRatio	::4:3
	ViewMode	::AutoFit
Video	TVSystem	::NTSC
	VideoOut	Interlaced:Component
Audio	SSmartPicture	P-Scan:Personal

Rating

Misc

F Press repeatedly to select { Video Out }, then press .

GSelect { P-Scan}, then press OK to confirm.

The menu will appear on the TV.

Activating Progressive Scan 1.Ensure your TV system supports Progressive Mode

2.If there is a distorted picture on the TV, wait 15 seconds for automatic recover

YesNO

H Press	to highlight { Yes } and press
OK to confirm.
The menu will appear on the TV.
	Confirm again to use new setting
	Revert to original setting in 14 seconds
	Yes	NO
I Press	to highlight { Yes } and press
OK to confirm.

JTurn on your TV progressive scan mode (refer to your TV user manual).

The setup is now completed and you can start enjoy the high quality picture.

To deactivate Progressive Scan manually:

Wait for 15 seconds for the auto recovery.

OR

APress OPEN/CLOSE ç on the DVD player to open the disc tray.

BPress numeric keypad ‘1’ on the remote control.

The DVD background screen appears.

Tip:

– There are some progressive scan TVs and High-Defi nition TVs that are not fully compatible with this unit, resulting in the unnatural picture when playing back a DVD VIDEO disc in the progressive scan mode. In such a case, turn off the progressive scan feature on both the DVD player and your TV.

English

TIPS: The underlined option is the factory default setting.

Press to go back to previous menu item. Press SETUP to exit the menu item.

17

01-43_MDV460_37_eng2.indd 17 2007-01-26 9:52:25 AM