Magnavox MDV540VR/17 owner manual Audio Cable Video Cable Video in Jacks On TV

H9660UD_1.qx4 04.4.14 4:47 PM Page 11

Hookups (cont’d) 11

DVD/VCR to a TV that has Audio and Video In jacks Using the supplied red, white, and yellow cables

This connection will let you use the features of both theVCR and the DVD Player.

1Antenna or Cable TV Signal to ANT-IN Jack

DVD DVD/VCR VCR

DIGITAL	AUDIO	S-VIDEO	COMPONENT	AUDIO OUT
			VIDEO OUT
AUDIO OUT	OUT	OUT	Y	L	L
	L		CB /
				R	R
			PB

COAXIAL	VIDEO OUT VIDEO IN
R
	R /
	R

ANT - IN

ANT-OUT

2

3

Audio Cable

Video Cable

Audio and

Video IN Jacks

on TV

1

2

Connect the antenna or Cable TV signal to the ANT-IN (Antenna In) jack of your DVD/VCR.

Connect the red and white audio cables (supplied) to the red and white DVD/VCR AUDIO OUT jacks on the DVD/VCR and to the red and white AUDIO IN jacks on the TV. Match the cable colors to the jack colors. If the TV has a single AUDIO IN jack, use the white audio cable to con- nect the DVD/VCR’s white DVD/VCR AUDIO OUT (left) jack to the TV’s AUDIO IN jack.You will not use the red cable. Or, purchase a “splitter” audio cable to go from the left/right AUDIO OUT jacks of the DVD/VCR to the TV’s single AUDIO IN jack.

3 Connect the yellow video cable (supplied) to the DVD/VCR VIDEO OUT jack on the DVD/VCR and to the VIDEO IN jack on the TV.

The VIDEO IN jack on the TV is usually yellow and may be labelled CVBS, Composite, or Baseband video.

4 Connect the power cords of the TV and the DVD/VCR to a power outlet.Turn on the TV and set it to the correct Audio/Video In channel. Go to your lowest TV channel (01 or 02), then change channels downward until you see VCR or DVD playback on the TV screen.

To help you find the right Audio/Video In channel, turn on the DVD/VCR. Press DVD to put the DVD/VCR in DVD mode.With no Disc in the Player, a large DVD Video logo will appear on the TV screen when you get the TV on the correct Audio/Video In channel.

Make sure PROGRESSIVE is OFF and P.SCAN does not appear on the DVD/VCR’s display panel. Disable

Progressive Scan either in the DISPLAY menu or by pressing and holding PLAY B (DVD) on the front of the DVD/VCR for more than five seconds. Details are on pages seven and 64-65.

5 You are ready to turn on the DVD/VCR. Go to page 17 to complete the first-time setup.