Magnavox MDV540VR/17 owner manual Automatic Operation Features

H9660UD_1.qx4 04.4.14 4:47 PM Page 44

44 Automatic Operation Features

The following tape features are available in VCR mode. Press VCR so the VCR light appears on the front of the DVD/VCR.

Automatic Playback

When you put a tape in the DVD/VCR, the power will come on. If the tape’s record tab is missing, playback will begin.

If a timer recording is set and is flashing in the display panel, the power will not come on automatically when you insert a tape with the record tab intact. If a timer recording is set and is flashing in the display panel, the DVD/VCR will eject the tape if the record tab is missing.

Automatic Rewind, Eject

When a tape is played, fast forwarded, or recorded to its end, the tape will rewind to the beginning, stop, and eject itself.

This feature does not operate if AUTO REPEAT is ON. Details are on page 40.

Tape Eject

A tape can be ejected with the DVD/VCR power on or off (but the DVD/VCR must be plugged in).

If a timer recording is set and appears in the display panel, pressing STOP/EJECT CA will turn on the DVD/VCR and/or can- cel the timer recording.The will turn off. Press STOP/EJECT CA again to remove the tape. Remember to insert a tape and press TIMER SET to reset the timer recording.

Automatic Tracking Adjustment

The VCR adjusts tracking automatically to give you the best possi- ble picture quality.With some recordings, however, you may get a better picture using manual tracking.

Manual Tracking

To manually adjust the tracking during normal and slow motion playback of a videotape, press NEXT ∑/CH o or PREV w/CH p on the remote.

Tracking will return to Automatic Tracking when you press STOP

Cor insert a tape.

You also can press NEXT ∑/CH o or PREV w/CH p to remove vertical jitter in a Still picture.

Before	After
Tracking	Tracking
Adjustment	Adjustment