Playing a CD
This
as 
1 | Push the OPEN 2 slider to open the player. |
2 | Insert an audio CD, printed side up, by pressing the |
| CD onto the hub. |
3 | Close the player by pressing the lid down. |
4 | Press 2; to switch the player on and start playback. |
| yThe current track number and elapsed playing |
| time are displayed. |
• | You can pause playback by pressing 2;. |
| yThe time at which playback was paused starts |
| flashing. |
• | You can continue playback by pressing 2; again. |
5 | Press 9 to stop playback. |
| yThe total number of tracks and the total playing |
| time of the CD are displayed. |
6 | Press 9 again to switch the player off. |
• | To remove the CD, hold it by its edge and press the |
| hub gently while lifting the CD. |
Selecting a track and searching
Selecting a track during playback
•Briefly press ° or ¤ once or several times to skip to the current, previous or
next track.
yPlayback continues with the selected track, and
the track’s number is displayed.
Selecting a track when playback is stopped
1 Briefly press ° or ¤ once or several times to select the desired track. The track number is displayed.
2Press 2; to start CD play.
yPlayback starts with the selected track.
Searching for a passage during playback
1Keep ° or ¤ pressed to find a particular passage in
a backward or forward direction.
ySearching starts while playback continues at low volume. After 2 seconds the search speeds up.
2Release the button when you reach the desired passage. yPlayback continues from this position.
Notes: – If the player is in SCAN mode (see MODE chapter), searching is not possible.
–In shuffle, shuffle repeat all or repeat mode (see MODE chapter), or while playing a program, searching is only possible within the particular track.
Note: If there is no activity, the set will automatically switch off after a while to save energy.
