Magnavox MPF68A, MTV68A manual Tuning Procedure, Menu

Tuning Procedure

MENU 1 -

A.Press [MENU 1] key continuously, menu screen will appear as follows:

B.Press [P+] [P-] key, cursor up or down.

Press [V+] [V-] key, change value for selection .

Note: Tint only for NTSC system.

Auto Search Function

Automatic Search and Memory (ASM) for program installation from Antenna input. The TV will search through the whole channel coverage and store all programs being transmitted, in sequential order.

A.Press [MENU 1] key repeatedly to select “PRESET”

B.Press [P+] or [P-] key, to select “ASM”

C.Press [V+] or [V-] key, to start ASM.and memorize into program list (0-255).

D.Wait until the process is completed.

On remote control, press [MENU] key on front panel and hold for three seconds, TV set will enter “ASM” mode.

Search Function

Manual Search for Antenna input.

A.Press [MENU 1] key repeatedly to select “PRESET”

B.Using [P+] or [P-] key, select “PROGRAM”.

Using [V+] or [V-] keys to change Program Number.

C.Press [P+] or [P-] key to select “BAND”. Press [V+] or [V-] key to change BAND.

D.Press [P+] or [P-] key to select “SEARCH”. Press [V+] or [V-] key to enter SEARCH screen. Press [V+] or [V-] key to start SEARCH.

E.The SEARCH function will locate channels in sequential order and will halt when a channel is found. Should this not be the channel you are seeking, press the [V+] button again to recommence search.

Band: You can select V-L, V-H or UHF. Channel 2 = V-L, Channels 7,9 & 10 = V-H, Channel SBS = UHF.

F.Wait until the process is completed.

10