Magnavox MRD120 Selecting various repeat functions, Program favorite tracks audio CDs and VCDs

Disc Operations

Selecting various repeat functions

Repeat play mode

●While playing a disc, press REPEAT to

select various repeat mode.

➜ "REPEAT” icon will appear on the display, except REPEAT OFF mode.

DVD

CHAPTER REPEAT ON ™

TITLE REPEAT ON ™ REPEAT-OFF

VCD/SVCD/CD

REPEAT-ONE (repeat the current track) ™ REPEAT-ALL ™

REPEAT-OFF

MP3

REPEAT-ONE ™ REPEAT-ALBUM ™ REPEAT-ALL ™ REPEAT-OFF

Helpful Hint:

–For VCD, repeat playback is not possible if the PBC mode is switched on.

Repeating a section within a chapter/track

1While playing a disc, press REPEAT A-Bat the starting point.

2Press REPEAT A-Bagain at the point to end the section.

➜The section A and B can be set only within the same chapter/track.

➜The section will now repeat continuously.

3Press REPEAT A-Bagain to resume normal playback.

Program favorite tracks (audio CDs and VCDs)

You can play the contents of the disc in the order you want by programming the order of the tracks to be played. Up to 99 tracks can be stored.

1Stop playback, then press PROG on the front panel to enter program mode.

2Use the numeric keypad (0-9) to enter

a valid track number.

➜ "FULL" will appear if you have programmed 99 tracks.

3Press OK to store the track.

4Repeat steps 2~3 to select other tracks.

5Press ÉÅto start program playback.

6Press Ç to stop playback or exit program mode.

Clearing the program

●Stop playback, then press the Ç again. ➜ "PROG CLR" appears.

Helpful Hints:

–If the DVD system is disconnected from the power supply, it will erase the program.

–For VCD, the program option is only possible if the PBC mode is turned off.

TIPS: The operating features described here might not be possible for certain discs. Always refer to the instructions supplied with the discs.

22

001-037-MRD120-37-Eng	22	8239 300 30533
		18/03/2004, 02:19 PM