Viewing and listening to the playback
1 Connect the VCR or Cable/Satellite Box to the TV as shown.
2 Connect the DVD system’s AUDIO IN- AUX jacks to the AUDIO OUT jacks on the VCR or cable/satellite box.
Before starting operation, press AUX on the remote to select “AUX” in order to activate the input source.
Using the VCR for recording DVD playback
3 Connect the DVD system’s VIDEO OUT jack to the VIDEO IN jack on the VCR.
4 Connect the DVD system’s LINE OUT jacks to the AUDIO IN jacks on the VCR. This will allow you to make analog stereo (two channel, right and left) recordings.
To view DVD playback while recording, you must connect the DVD system to your TV using S-VIDEO (as shown above) or Component
(Pr/Cr Pb/Cb Y) video connection.
| | Connections (optional) |
| | | |
| Connecting a VCR or | | Connecting digital audio |
| Cable/Satellite Box | | equipment |
1
OUT IN
TO TV
VIDEO | | | |
| S-VIDEO | VCR or |
AUDIO | IN | Cable/Satellite Box |
|
FRONT FRONT FRONT REAR | REAR SUBWOOFER |
RIGHT | LEFT CENTER RIGHT | LEFT |
DIGITAL IN
(for example) CD Recorder
FRONT FRONT FRONT REAR | REAR SUBWOOFER |
RIGHT | LEFT CENTER RIGHT | LEFT |
Digital Recording
●Connect the DVD system’s DIGITAL OUT-COAXIALjack to the DIGITAL COAXIAL IN jack on a digital recording device (such as Dolby Digital decoder, CD recorder.)
Before starting operation, set the DIGITAL OUTPUT according to the audio connection. (See page 26 “Setting the digital output”.)
Helpful Hints:
–Some DVDs are copy-protected. You cannot record the disc through a VCR or digital recording device.
–Always refer to the owner’s manual of the other equipment for complete connection and usage details.
13
001-037-MRD120-37-Eng | 13 | 8239 300 30533 |
18/03/2004, 02:19 PM |
