![](/images/new-backgrounds/1233437/23343721x1.webp)
Mobile Connections 11
When passengers in your vehicle want to watch a video program, hook up the VCP by following the steps below.
|
| ANT OUT |
|
| CH3 |
| AUDIO | CH4 |
13.2V | OUTPUT | ANT IN |
| VIDEO |
|
AC Power Cord
Car Battery Cord | To 13.2V Jack |
(supplied)
To Cigarette Lighter Jack
1
Make sure your vehicle has a
2
Connect one end of the car battery cord to the 13.2V Jack on the back of the VCP.
3
Connect the other end of the car battery cord to the ciga- rette lighter jack in your vehicle.
4
Follow step 3 on page seven to connect the VCP to a TV.
5
Connect the TV to a DC power source. The TV must have an AC/DC Jack.
Helpful Hints
•Do not watch TV while driving.
•Use only the supplied car battery cord. Using another cord could dam- age the VCP or cause faulty opera- tion.
•Make sure the cigarette lighter jack is free of ashes and other debris.
•Make sure you push the car battery cord’s plug completely into the ciga- rette lighter jack.
•Always unplug the car battery cord from the cigarette lighter jack before you unplug it from the VCP.
•You must disconnect the car battery cord from the VCP before you can use standard AC electrical power.
•If the vehicle’s engine is off, there will not be enough electrical voltage to operate the VCP.
•Unplug the car battery cord from the cigarette lighter jack when you have finished using the VCP.