Before Using Your VCP 5

Putting Batteries in the Remote Control

1

Remove the battery compartment lid on the bottom of the remote control by sliding the lid in the direction of the arrow.

2

Insert two AA batteries inside the battery compartment

with their + and – ends aligned as indicated.

3

Replace the battery compartment lid.

Using the Remote Control

Point the remote control at the VCP’s remote sensor when operating the VCP.

Do not put objects between the remote control and the VCP.

VCR Maintenance

Use only tapes with the mark.

Remove any light adhesive stick-on notes from the video cas- sette tape before putting the tape in the VCP. Removable labels can jam the VCP.

Periodic maintenance is required to maintain your VCP’s excel- lent performance. This VCP has an Automatic Head Cleaner. However, the video heads will require replacement eventually. Only an authorized service center should perform this service.

1

2

3

Types of Video Cassette Tapes

The chart below shows the playback time for three types of video cassettes (T160, T120, and T60). There are three playback speeds: SP, LP, and SLP.

 

Cassette type/Playback Time

Tape Speed

T160

T120

T60

SP (standard play)

2 hrs.

2

hrs.

1 hr.

 

40 mins.

 

 

 

 

LP (long play)

5 hrs.

4

hrs.

2 hrs.

 

20 mins.

 

 

 

 

SLP (super long play)

8 hrs.

6

hrs.

3 hrs.

 

 

 

 

 

 

Helpful Hints

The remote control and its batteries are supplied.

Do not mix alkaline and man- ganese batteries.

Do not mix old and new batteries.

Page 5
Image 5
Magnavox VPA115AT owner manual Before Using Your VCP, Putting Batteries in the Remote Control, Using the Remote Control