Hookups With a Cable Box, Playing a Tape

8 Hookups With a Cable Box

This connection allows you to view any channel. You must select channels at the Cable Box.

1.Connect the Cable signal to the IN Jack on the Cable Box.

3. Use a second RF coaxial cable to con- nect the ANT(enna) OUT jack on the

2.Use the RF coaxial cable (supplied) to connect the OUT Jack on the Cable Box to the ANT(enna) IN Jack on the VCP.

Set the TV to the Cable Box output channel (channel 3 or 4).

Select the channel you want to watch at the Cable Box. You can not select channels at the TV.

Set the TV to channel 3 or 4, whichever channel the CH3/CH4 switch on the VCP is set to.

Press the PLAY button to play the tape.

Image 8

Contents

VPA115AT Dear Philips Magnavox product owner For Customer UseThis bolt of lightning indi- cates uninsulated material Model No Serial No Introduction FeaturesSafety Precautions Table of Contents Before Using Your VCP Putting Batteries in the Remote ControlUsing the Remote Control VCR Maintenance Hookups Without a Cable Box Disconnect the antenna or cable from your TV You are ready to turn on the VCP Hookups Without a Cable Box cont’dPlug in the TV and the VCP Hookups With a Cable Box Watching TV with the VCP OffPlaying a Tape VCP to the TV’s TV Antenna in Jack Connect a Cable signal to the VCP’s ANTenna in JackHookups With a Cable Box cont’d Hookups With a Stereo TV Helpful Hint Mobile Connections Remote Control Buttons Display Panel Front Panel AC Power Cord CH3/CH4 Switch ANTenna OUT Jack Rear PanelAudio Output Jack Video Output Jack ANTenna in Jack 13.2V Jack Playing Playback Options Repeat PlaybackPicture Control PICTurePICTure Control Button Control Light Viewing a Still Picture Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Automatic Operation Features Helpful Hints Limited Warranty Model # Serial # Glossary Specifications/GlossarySpecifications Power Remote Control Buttons Using Sensor Repeat Light PlaybackWarranty Controls Supplied Accessories