![](/images/new-backgrounds/1188231/18823129x1.webp)
Follow the steps below to set your VCR’s clock. Make sure:
●The VCR is on and the VCR Light appears on the display panel. (If it does not, press the VCR/TV button once.)
●You make each entry within 60 seconds of the previous entry.
1
Press the MENU button.
2
Press the PLAY/o button or the STOP/p button to select SET CLOCK, then press the F.FWD/B button.
3
Press the PLAY/o button or the STOP/p button to select SET CLOCK, then press the F.FWD/B button.
TIME –
DATE –
TO END PUSH EXIT
4
Press two Number buttons for the hour(s) and two Number buttons for the minute(s). Then press 1 for AM or 2 for PM. For example, for 2:15 PM, press 02, 15, 2.
TIME 02 :15 PM
MONTH –
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
5
Press two Number buttons for the month, two Number buttons for the day, and two Number buttons for the year. For example, for July 1, 2000, press 07, 01, 00. The day of the week will appear automatically.
TIME 02 :15 PM
DATE 07 / 01 / 00
SAT.
TO CORRECT PUSH CLEAR
TO END PUSH EXIT
6
Press the STATUS/EXIT button.
Setting the Clock 15
| POWER |
| VCR/TV | EJECT |
| 1 | 2 | 3 |
|
| 4 | 5 | 6 |
|
6 | 7 | 8 | 9 | CHANNEL |
| ||||
| 0 |
|
| |
SPEED | TIME SEARCH | MEMORY | ||
1 | MENU | STATUS/EXIT | CLEAR | SLOW |
REWIND | /PLAY | F.FWD | ||
| REC/OTR | /STOP | PAUSE/STILL |
Helpful Hints
•Enter a 0 before a single-digit number.
•Entries that do not match the VCR’s clock or calendar will cause a question mark to appear on the screen.
•To make corrections, press the CLEAR button until the space for the number you want to correct is flashing. Then enter the correct number.
•To see the current time on the TV screen, press the STATUS/EXIT but- ton. Details are on page 20.
•Power failures that last for more than one minute can cause you to lose your clock setting.