VRZ242 LAYOUT 4/9/99 9:24 AM Page 27
Read and follow the steps below to record a television program.
1
Turn on the TV and set it to channel 3 or 4, whichever the CH3/CH4 switch on the back of the VCR is set to.
Recording 27
1Turn on the TV.
2Insert a tape in the VCR.
2
Insert a tape with its record tab intact in the VCR.
3
Press the VCR button.
4
If the VCR light appears on the display panel, go to step 5. If the
3
5
POWER | VCR | TV |
|
|
1 2 3
4 5 6
7 8 9
VCR PLUS+ |
|
|
/ENTER |
|
|
| 0 | +100 |
SPEED | TIME SEARCH | MUTE |
CBL/DBS
VCR/TV
CHANNEL
VOLUME
4
6
VCR light does not appear, press the VCR/TV button once.
5
Press the SPEED button until the desired tape speed appears briefly
6
Use the CHANNEL o/p buttons or the Number buttons to select the channel to be recorded.
7
Press the REC(ord)/OTR button once to start recording. The REC light will appear.
8
To pause the recording, press the PAUSE/STILL button once. The REC light will flash. To resume recording, press the REC(ord)/OTR button or press the PAUSE/STILL button again. The REC light will come on again.
9
To stop recording, press the STOP/p button.
|
| PLAY |
| 9 | |
| REW |
| F.FWD | ||
|
|
| |||
7 |
| STOP |
| 8 | |
REC/OTR | MEMORY | SLOW | PAUSE/STILL | ||
| MENU | STATUS/EXIT | CLEAR | EJECT |
|
Helpful Hints
•If you press the REC(ord)/OTR but- ton when there is not a tape in the VCR, NO CASSETTE will flash on- screen.
•If you press the REC(ord)/OTR but- ton while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CAS- SETTE CANNOT RECORD will flash
•Other recording options are on pages 28 - 38.
•You can change the tape speed during a recording, but some distor- tion will appear on the tape.
•The VCR will record in a preset vol-
ume.
