Setting Up the VCR Plus+ Programming System | Magnavox VRZ242AT

VRZ242 LAYOUT 4/9/99 9:25 AM Page 34

34 Setting Up the VCR Plus+ Programming System

1

First, fill in the boxes on this page. It will only take a few minutes, and you must do it if you want the VCR Plus+ programming system to work properly.

Since the channel numbers of the stations you receive may not be the same as the station numbers, and since channel numbers differ from area to area, you must program the VCR with your local channel infor- mation. To fill in the boxes, you will need 1) a cable channel list, if applicable (you can request one from your cable company), and 2) a chart that lists VCR Plus+ channel numbers, which you can find in your TV guide or the TV listings of your local newspaper.

Channels

	Station	VCR PLUS+ CH.	CABLE/TV CH.
	Call Letters	VCR PLUS+ CH.	CABLE/TV CH.
	Call Letters

Channels

	Station	VCR PLUS+ CH.	CABLE/TV CH.
	Call Letters	VCR PLUS+ CH.	CABLE/TV CH.
	Call Letters

Image 34

Magnavox VRZ242AT owner manual Setting Up the VCR Plus+ Programming System, Channels

Contents

VRZ242AT Dear Philips Magnavox product owner For Customer Use Safety Precautions FeaturesIntroduction Table of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TV Plug in the TV and the VCR ANT Audio OUT Connections Hookups With a Cable Box / Direct Broadcast SystemRecording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching Another Hookups With a Stereo TV Turning on Your VCR 2Turn on the TV Automatic Channel Setup Press the VCR button Press the Menu button Automatic Channel Setup cont’d Adding/Deleting Channels Reviewing Memorized Channels Press the STATUS/EXIT button once or twice to exit Setting the Clock Enter a 0 before a single digit num- ber Daylight-Saving Time Language Selection Setting the Remote to Operate a TV 2Find Remote Control Buttons VCR PLUS+/ENTER Button Remote Control Buttons cont’d If you select Status ON, then select Counter only on On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only OFF VCR Display Panel Front Panel Rear Panel Playing Recording VCR light does not appear, press the VCR/TV button once Recording One Channel/Watching Another One-Touch Recording Timer Recording Daily Timer Recording cont’d Instructions continue on Press the STATUS/EXIT button. Program WAS COM Tape Speeds Checking or Cancelling Timer Recordings See page 44 for more hints Setting Up the VCR Plus+ Programming System Channels Setting Up the VCR Plus+ Programming System cont’d Do each step within 60 seconds of the previous step Press the VCR PLUS+ /ENTER button Timer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication Antenna Repeat Play Press the F.FWD/B button so that on appears beside Press the VCR button Press the Time Search button Time SearchWithin 10 seconds, use the Number buttons to enter Real-Time Counter Memory Super High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still Picture Automatic Operation Features Helpful Hints Helpful Hints cont’d Glossary Cable Box Output Channel 03 or Specifications Limited Warranty Video Cassette Recorder Index Automatic VRZ242 Layout 4/9/99 925 AM VRZ242 Layout 4/9/99 925 AM Supplied Accessories