Hookups With a Stereo TV | Magnavox VRZ242AT manual

VRZ242 LAYOUT 4/9/99 9:24 AM Page 10

10 Hookups With a Stereo TV

			ANT
			IN
AUDIO
OUT	IN		OUT
VIDEO		CH3	CH4
VIDEO

VIDEO (yellow) and	2
AUDIO (white) OUT Jacks

1 antenna or cable to

ANT(enna)

IN Jack

Video Cable

Audio and Video IN Jacks on TV

3 Audio Cable

●Audio and Video cables are not supplied.

1

Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR.

2

Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV.

3

Connect an audio cable to the white AUDIO OUT Jack on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jack on your TV.

(If your TV has Right and Left AUDIO IN Jacks, you must use a “Y” splitter audio cable as illustrated to deliver audio to the TV’s right and left channels.)

4

Turn on your TV, making sure it is in Line Input mode. Please refer to your TV owner’s manual for details.

Helpful Hint

•This hookup will not give you stereo sound. To get stereo sound, use the connections on pages six - seven and select the channel to be viewed at the TV (with the VCR turned off).

Image 10

Magnavox VRZ242AT owner manual Hookups With a Stereo TV

Contents

VRZ242AT Dear Philips Magnavox product owner For Customer Use Safety Precautions FeaturesIntroduction Table of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TV Plug in the TV and the VCR ANT Audio OUT Connections Hookups With a Cable Box / Direct Broadcast SystemRecording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching Another Hookups With a Stereo TV Turning on Your VCR 2Turn on the TV Automatic Channel Setup Press the VCR button Press the Menu button Automatic Channel Setup cont’d Adding/Deleting Channels Reviewing Memorized Channels Press the STATUS/EXIT button once or twice to exit Setting the Clock Enter a 0 before a single digit num- ber Daylight-Saving Time Language Selection Setting the Remote to Operate a TV 2Find Remote Control Buttons VCR PLUS+/ENTER Button Remote Control Buttons cont’d If you select Status ON, then select Counter only on On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only OFF VCR Display Panel Front Panel Rear Panel Playing Recording VCR light does not appear, press the VCR/TV button once Recording One Channel/Watching Another One-Touch Recording Timer Recording Daily Timer Recording cont’d Instructions continue on Press the STATUS/EXIT button. Program WAS COM Tape Speeds Checking or Cancelling Timer Recordings See page 44 for more hints Setting Up the VCR Plus+ Programming System Channels Setting Up the VCR Plus+ Programming System cont’d Do each step within 60 seconds of the previous step Press the VCR PLUS+ /ENTER button Timer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication Antenna Repeat Play Press the F.FWD/B button so that on appears beside Press the VCR button Press the Time Search button Time SearchWithin 10 seconds, use the Number buttons to enter Real-Time Counter Memory Super High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still Picture Automatic Operation Features Helpful Hints Helpful Hints cont’d Glossary Cable Box Output Channel 03 or Specifications Limited Warranty Video Cassette Recorder Index Automatic VRZ242 Layout 4/9/99 925 AM VRZ242 Layout 4/9/99 925 AM Supplied Accessories