Time Search | Magnavox VRZ242AT manual

VRZ242 LAYOUT 4/9/99 9:25 AM Page 40

40 Time Search

Follow the steps below to program the VCR to search forward or backward on a tape a specific length of time. There must be a tape in the VCR.

1

Press the VCR button.

2

Press the TIME SEARCH button.

TIME SEARCH

0:00

3

2

1

POWER	VCR	TV	CBL/DBS
	2	3	VCR/TV
1	2	3
4	5	6
			CHANNEL
7	8	9
VCR PLUS+
/ENTER
	0	+100
SPEED	TIME SEARCH	MUTE	VOLUME
SPEED

ENTER SEARCH TIME

	3	4
	Within 10 seconds, use the Number buttons to enter the	4
	Within 10 seconds, use the Number buttons to enter the
	desired length of time you want to skip forward or back-
	ward. For example, for 1 hour, 25 minutes, press Number but-
	tons 1, 2, 5. Or, for five minutes, press Number buttons 0, 0, 5.
	4
	Within 10 seconds, press the F.FWD/B button or the
	REW(ind)/{ button. The VCR will skip over the specified
	length of time, then begin playback.

	PLAY
REW			F.FWD
	STOP
REC/OTR	MEMORY	SLOW	PAUSE/STILL
MENU	STATUS/EXIT	CLEAR	EJECT

Helpful Hints

•If you want to search for more than 59 minutes, you must enter the length of time in hours and minutes. For example, to search forward 70 minutes, press 1,1,0 at step 3.

•You can not do a Time Search while recording.

•To remove the Time Search display, press the TIME SEARCH button again.

•To cancel a Time Search that is in progress, press the STOP/p button.

Image 40

Magnavox VRZ242AT owner manual Press the VCR button Press the Time Search button

Contents

VRZ242AT Dear Philips Magnavox product owner For Customer Use Safety Precautions FeaturesIntroduction Table of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TV Plug in the TV and the VCR ANT Audio OUT Connections Hookups With a Cable Box / Direct Broadcast SystemRecording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching Another Hookups With a Stereo TV Turning on Your VCR 2Turn on the TV Automatic Channel Setup Press the VCR button Press the Menu button Automatic Channel Setup cont’d Adding/Deleting Channels Reviewing Memorized Channels Press the STATUS/EXIT button once or twice to exit Setting the Clock Enter a 0 before a single digit num- ber Daylight-Saving Time Language Selection Setting the Remote to Operate a TV 2Find Remote Control Buttons VCR PLUS+/ENTER Button Remote Control Buttons cont’d On-Screen Status Displays Status Display example onlyIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFF VCR Display Panel Front Panel Rear Panel Playing Recording VCR light does not appear, press the VCR/TV button once Recording One Channel/Watching Another One-Touch Recording Timer Recording Daily Timer Recording cont’d Instructions continue on Press the STATUS/EXIT button. Program WAS COM Tape Speeds Checking or Cancelling Timer Recordings See page 44 for more hints Setting Up the VCR Plus+ Programming System Channels Setting Up the VCR Plus+ Programming System cont’d Do each step within 60 seconds of the previous step Press the VCR PLUS+ /ENTER button Timer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication Antenna Repeat Play Press the F.FWD/B button so that on appears beside Press the VCR button Press the Time Search button Time SearchWithin 10 seconds, use the Number buttons to enter Real-Time Counter Memory Special Effects Playback Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still Picture Automatic Operation Features Helpful Hints Helpful Hints cont’d Glossary Cable Box Output Channel 03 or Specifications Limited Warranty Video Cassette Recorder Index Automatic VRZ242 Layout 4/9/99 925 AM VRZ242 Layout 4/9/99 925 AM Supplied Accessories