Magnavox ZC352MW8 owner manual Troubleshooting, Recording / Timer recording / Editing, Others

	TROUBLESHOOTING
Symptom	Remedy
Playback
The disc does not play back.	• No disc is inserted.
	• A blank disc is inserted.
	• The disc is upside down. Insert the disc with the labeled side facing up.
	• The disc is not correctly inserted.
	• The unit cannot play back certain discs (such as a CD-ROM) (page 46).
	• The region code on the DVD-video does not match the unit (page 46).
	• Moisture has condensed inside the unit. Remove the disc and leave the unit
	turned on for about 2 hours until the moisture evaporates (page 4).
	• If the disc was recorded on another recorder, the unit cannot play back the
	disc if it was not finalized.

Discs recorded on this unit cannot be played back on other DVD players.

•If you are using DVD+R, DVD-RW/-R disc, please ensure you finalized the disc after recording (page 44).

The disc does not start playback from the beginning.

•Resume playback was activated (page 52). Press [STOP C] twice.

•You have inserted a disc whose title menu or DVD menu automatically appears on the TV screen when it is first insert.

The unit starts playing back the disc automatically.

• The DVD-video features an auto playback function.

Some functions such as stop, search, or slow-motion playback cannot be performed.

•Depending on the disc, you may not be able to do some of the operations. Refer to the instruction manual supplied with the disc.

The language for the sound track cannot be changed.

•Multilingual tracks are not recorded being played back.

•The DVD-video prohibits the changing of the language for the sound track.

•Try changing the language using the DVD-video’s menu.

The subtitle language cannot be changed or turned off.

•Multilingual subtitle are not recorded on the DVD-video.

•The DVD-video prohibits changing of the subtitles.

•Try changing the subtitle using the DVD-video’s menu.

The angles cannot be changed.

•Multi-angles are not recorded on the DVD-video being played back.

•The angle-change operation is whenever possible as long as the disc contains a multi-angle portion. Actual change will be performed when the portion has come up.

•The DVD-video prohibits changing angles.

•Try changing the angle using the DVD-video’s menu.

Recording / Timer recording / Editing

The channel cannot be changed • Set the TV’s input to “TV.” from the channel you are

recording.

Nothing was recorded even though you set the timer setting correctly.

•There was a power failure during recording.

•The unit’s internal clock stopped due to a power failure that lasted for more than 30 seconds. Reset the clock (pages 23- 24).

•Disconnect the AC power cord from the AC outlet, and connect it again.

•The program contains copy protection signals that restricts copying.

•The timer setting overlapped with another setting that has priority.

Recording does not stop immediately after you press [STOP C].

•It may take a few seconds for the unit to input disc data before recording stops.

Timer recording is not complete or did not start from the beginning.

•The timer setting overlapped with another setting that has priority (page 38).

•Disc space was not enough.

Others
The unit does not operate	• When static electricity, etc., causes the unit to operate abnormally, unplug
properly.	the unit and then plug it in again.
The disc tray does not open when	• It may take a few seconds for the disc tray to open after you have recorded or
you press [OPEN/CLOSE A].	edited a disc.
	• This is because the unit is adding disc data to the disc.

84 EN