Magnavox ZC352MW8 owner manual Setups, Required Setting, Refer to, Selected item

SETUPS

Required Setting

Press [STOP C] if you are playing back a disc.

1Press [SETUP].

2Use [K / L] to select “Required

Settings”, then press [OK].

3Use [K / L] to select a desired item, then press [OK].

Required Settings

	3	Video Input
	1	TV Aspect		4:3 Letter Box
	4	TV Audio Select		Stereo
	5	CC Style
	2	V-Chip
4	Submenu will appear.
	Refer to 1		to 2	on this page and set
	the selected item.
	• For 3 refer to page 41.

• For	4	refer to page 27.
• For		refer to pages 28-30.
	5

5When you finish with setting, press [SETUP] to exit.

1 TV Aspect (Default: 4:3 Letter Box)

You can select the TV aspect ratio to match the formats of what you are playing back with the unit and your TV screen (4:3 standard or 16:9 widescreen TV).

Use [K / L] to select a desired option, then press [OK].

TV Aspect

4:3 Letter Box

4:3 Pan & Scan

16:9 Wide

If you have a standard TV:

Select “4:3 Letter Box”, so that black bars appear on the top and bottom of the TV screen when playing back a wide-screen picture. Select “4:3 Pan & Scan” for a full height picture with both sides trimmed when playing back wide-screen picture.

If you have a widescreen TV:

Select “16:9 Wide”.

2 V-Chip

You can set the viewing limitation for the digital TV programs to prevent your children from watching inappropriate programs.

This feature is available only after the digital TV ratings have been downloaded.

•The ratings can be downloaded by the unit automatically if it is available in your area.

1)Use [the Number buttons] to enter the access password.

If you have not set the password, first, use [the Number buttons] to set the access password, then press [OK]. The number you entered will be stored as the access

password.

Password Input

2) Use [K / L] to select a desired item, then press [OK].

V-Chip

Downloadable Rating

Change Password

Downloadable Rating

Set the rating system via digital broadcasting, or clear the downloaded ratings.

If the broadcasting signal does not have the downloadable rating information, the message below will appear.

Downloadable Rating is currently not available.

•This message will also appear when you try to access “DOWNLOADABLE RATING” after you have cleared the downloadable rating information, and the new information has not been downloaded since.

To set the rating:

Use [K / L] to select “BLOCK SETTING” then press [OK] to show the various types of ratings. Use [K / L] to select a desired rating to set, then press [OK] to show the levels for the rating. Use [K / L] to select a level, then press [OK] to switch “VIEW” or “BLOCK”. If you set one level to “BLOCK”, all the higher levels will be turned to “BLOCK” automatically.

To clear the downloadable rating information and its setting:

Use [K / L] to select “CLEAR DOWNLOADABLE RATING”, then press [OK].

Change Password

Change the current password.

Use [the Number Buttons] to enter new access password.

Note

•When you forget the access password at step 1), enter 4,7,3,7 using [the Number buttons] in the password input window. Password will be cleared.

•Depending on the type of rating system, you may set the levels individually.

Introduction Connections Basic Setup Recording Playback

Editing Function Setup Others

Español

EN 77