Magnavox ZV457MG9 owner manual Other Operations

VCR FUNCTIONS

Time Search Other Operations

Introduction

This feature allows you to go to a specific point on a cassette tape by entering the exact amount of time you wish to skip in order to reach the point.

Press [VCR] first.

1)Press [SEARCH] repeatedly so that “TIME SEARCH” menu appears.

2)Using [the Number buttons], enter your desired time to skip within 30 seconds.

You can set the time up to 9:59.

TIME SEARCH 2:50

3)Press [E], [D] to start time search.

If you want to go in the forward direction, press [D].

If you want to go in the reverse direction, press [E].

After time search, the unit will play back the cassette tape automatically.

Note

•Index search and time search are not available during recording.

•Press [STOP C] to stop the search.

•If the end of the cassette tape is reached during search, this unit will cancel the search and rewind the cassette tape.

Press [VCR] first.

Fast forward:

When the unit is in stop mode, press [D] to fast forward the cassette tape.

Rewind:

When the unit is in stop mode, press [E] to rewind the cassette tape.

To cue or review picture during playback (picture search):

Press [E], [D] during playback.

Press it again and the unit will search in super high speed. (in the SLP mode only)

To freeze the picture on TV screen during playback (still mode):

Press [PAUSE F]. Each time you press the button, the picture will be forwarded by one frame.

If the picture begins to vibrate vertically during the still mode, stabilize the picture by pressing [CHANNEL/] on remote control.

If the picture is distorted or rolling vertically, adjust the vertical hold control on your TV, if equipped.

Counter reset:

Press [CLEAR] to reset the counter to “0:00:00”.

To playback in slow motion:

Press [PAUSE F] during playback, then press [D]. Press [D] or [E] repeatedly to select the desired speed.

Automatic rewind:

When a cassette tape is played back or fast forwarded to its end, the cassette tape will rewind to the beginning, stop and eject itself.

When you playback a cassette tape recorded in Hi-Fi stereo:

Press [AUDIO] on the remote control to select Hi-Fi or MONO for playback sound mode.

•If you have connected a stereo TV to this unit, select “HIFI”.

•If you have connected a monaural TV to this unit, select “MONO”.

Your Selection	HIFI		MONO
Type of recorded tape	L-channel	R-channel
non Hi-Fi tapes	Monaural	Monaural	Monaural
Hi-Fi tapes
recorded in	L	R	L+R
Hi-Fi stereo
Hi-Fi tapes	Main audio	Main audio	Main audio
recorded main
	program	program	program
audio program
Hi-Fi tapes	Second audio	Second audio	Second audio
recorded second
	program	program	program
audio program

Note

•Still/slow mode will stop after 5 minutes to prevent damage to the cassette tape and the video head.

•To return to playback from the picture search/still/ slow mode, press [PLAY B].

Connections Basic Setup Recording Playback Editing Function Setup VCR Functions Others

Español

EN 95