combustible materials. Combustible wall coverings such as paneling or wallboard may not overlap the black face of the fireplace. The space between the wall covering and the fireplace should be sealed with a heat-resistant material such as rock wool insulation or mortar. If covering the dace with a noncombustible, use the flush panel kit. Do not place facing material directly over the louvered openings.

NOTE: An "L" shaped steel lintel must be installed across the top of the firebox opening where facing materials such as brick or stone are used on the face of the firebox. It acts as a support/firestop. It should be attached to the face of the fireplace with screws and sealed to the fireplace with a heat-resistant sealer.

UVSRC Vent-Free Fireboxes

Servicing

Repair and replacement work should only be done by a qualified service person.

Always shut off the gas supply and make sure the appliance is cool before beginning any service opera- tion.

Always check for gas leaks after servicing.

20007435

9

Page 9
Image 9
Majestic Appliances UVSRC42A, UVSRC36A installation instructions Servicing