OPERATION
Planing operation
First, rest the tool front base flat upon the workpiece surface without the blades making any contact. Switch on and wait until the blades attain full speed. Then move the tool gently forward. Apply pressure on the front
of tool at the start of planing, and at the back at the end of planing. Planing will be easier if you incline the workpiece in sta- tionary fashion, so that you can plane somewhat downhill. The speed and depth of cut determine the kind of finish. The power planer keeps cutting at a speed that will not result in jamming by chips. For rough cutting, the depth of cut can be increased, while for a good finish you should reduce the depth of cut and advance the tool more slowly.
MAINTENANCE
CAUTION:
Always be sure that the tool is switched off and the battery cartridge is removed before attempting to perform inspection or maintenance.
To maintain product SAFETY and RELIABILIW, repairs, maintenanceor adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
Recycling the Battery
The only way to dispose of a Makita battery is | I |
to recycle it. The law prohibits any other | |
method of disposal. |
To recycle the battery:
1.Remove the battery from the tool.
2.a). Take the battery to your nearest Makita Factory Service Center or
b). Take the battery to your nearest Makita Authorized Service Center or Distributor that has been designated as a Makita battery recycling location.
Call your nearest Makita Service Center or Distributor to determine the location that provides Makita battery recycling. See your local Yellow Pages under
16
