Makita 2004 instruction manual HOW T O USE the Sharpening Holder

0To replace carbon brushes, use the (-1minus screwdriver equipped to remove the holder cap on the motor housing. Then replace the brush.

HOW T O USE THE SHARPENING HOLDER
0 First, loosen the 2 wing nuts on the holder	Wing nut
and insert blades Aand B as in figure a t right,
so that they contact side C and D.	-w
Then tighten wing nuts.

0Immerse dressing stone in water .Jr 2 or 3 minutes before sharpening. Iiold the holder so that blades both contact the dressing stone for simultaneous sharpening a t the same angle.

I

I O