After hooking the lever for drum locking onto the stopper, secure the hex bolts hold- ing down the blade holder: a total of 8 on the planer arid jointer sides, respectively.

0After all bolts have been secured, check your cutter height agian.

MAINTENANCE

0Remove the chain guard and lubricate the chain with machine oil.

Oil the sliding support parts, moving parts and feed screw portionswhenever you think it necessary.

CARBON BRUSH REPLACEMENT

0Replace carbon brushes when they wear down to about 6 mm (1/4") or sparking will occur. Both brushes should be changed a t the same time.

L

I_-----

!

9

Page 9
Image 9
Makita 2004 instruction manual Maintenance