13
EMPTYING THE DUST CUP
The dust cup needs to be emptied each time yo u
vacuum and periodically during cleanin g, when the
dust cup appears full.
1 Undo the latches on the sides of the dust cup by
lifting them up and outwards to remove t he dust
cup from the motor base. (Fig. 22)
2 Hold the dust cup over a trash recept acle and press
the bottom door release button. (F ig. 23) Tap
gently to empty contents. Press the d oor shut
again until it clicks.
3 If needed, turn the dust cup upsi de down over the
trash receptacle and press the top door r elease
button. (Fig. 24) Tap gently to remove contents .
Use a dry cloth or paper towel to remove debris
stuck to the screen filter inside the dust cup. P ress
the door shut again until it clicks.
4 Replace the dust cup on top of the motor base.
Hook the two latches onto the tabs on the si des of
the dust cup and push down to lock.
Screen
Filter
To reduce the risk of electric shock, unplug the unit
before performing any cleaning, maint enance, or
troubleshooting checks.
Reassemble all parts securely before operating
vacuum.
DO NOT operate the vacuum without the pre-
motor filters and dust cup in place.
DO NOT operate the vacuum with WET filters.
IMPORTANT: Make sure all filters are completely
dry before inserting back into vacu um.
WARNING: Never insert sharp objects into any
opening to clear an obstruction.
IMPORTANT: Damages caused while clearing
or attempting to clear blockages are not c overed
under your product’s limited warrant y.
Fig. 22
Fig. 24
Maintenance
Fig. 23
NV350Q_26_IB_ENG_101019.indd 13 10-10-19 9:19 AM