8
TO ASSEMBLE:
1 Place the floor nozzle on a level surface.
2 Align the tube of the floor nozzle with the tube on
the detachable canister and lower until yo u hear
the two pieces click into place. (Fig. 9)
When attaching the motorized floor brush, ensure
that the latching mechanism is fully locked in plac e
to ensure electrical connection h as been made.
NOTE: To change floor nozzles, press the red
release button (a) on the side of the detachab le
canister, gently hold the nozzle to the floor wi th
your foot and pull the detachable caniste r up.
(Fig. 10)
3 Attach the end of the extension wand to the tube
on the back of the detachable canister unt il it
clicks into place. (Fig. 11)
4 Slide the accessory holder (a) positioned opposite
the upper cord wrap, over the extension wa nd.
Align the tab with the groove and push down .
(Fig. 12)
5 Push the handle (b) onto the top of the extension
wand until you hear it click into place. (Fig. 12)
6 Insert the end of the stretch hose (c) into the
connector on the back of the detachab le canister.
(Fig. 12)
7 Store the dusting brush (d) and the crevice tool
(e) on the mounts of the accessory holder.
(Fig. 12)
Mode 1: Upright Vac To reduce the risk of electric shock, unplug the unit before assembling, addi ng or removing attachment s or
converting modes.
WARNING: The On/Off switch is on the top of the detachable canister. Alw ays ensure the power is OFF
(“O” position) before plugging and unplugging.
Fig. 9 Fig. 10
a
Fig. 11 Fig. 12
a
b
c
Upper
Cord
Storage
Wrap
d
e
NV350Q_26_IB_ENG_101019.indd 8 10-10-19 9:19 AM