11
Above-Floor CleaningCLEAN THE FLOOR IN DETACHABL E CANISTER
MODE
1 Press the extension wand release button and pull
the extension wand up.
2 Attach either floor nozzle onto the end of the
extension wand. (Fig. 18)
3 Press the On/Off switch to the “I” position to turn
the suction motor on.
NOTE: The rotating brush will not rotate in
Detachable Canister mode.
With Floor NozzlesCLEAN ABOVE THE FLOOR IN UPR IGHT VAC OR
DETACHABLE CANISTER MOD E
1 Press the handle release button and pull the
handle up or press the extension wand relea se
button and pull the extension wand up.
2 Attach desired accessory onto the end of eit her
the extension wand or the handle. (Fig. 17)
3 Your vacuum has tremendous sucti on
power. Adjust the amount of suc tion with
the suction release on the h andle. Open
the valve (a) by rotating the collar 9 0˚
counterclockwise for l ow suction when
doing light jobs such as drape s or fine
surfaces. Close the valve (a) by rot ating
the collar clockwise 90˚ for hi gh suction
and when using the hand hel d turbo brush.
(Fig. 17)
4 Press the On/Off switch to the “I” position to turn
the vacuum on for above-floor cleaning.
IMPORTANT: Ensure vacuum is in upright
position. Do not use position “II” when cleani ng
above the floor in the upright vac mode as this
will engage the motorized floor brush. The
rotating brush may damage your floor if run for a
prolonged period of time in one area.
Fig. 18
Fig. 17 Suction
Release Collar
a
Release suction
for easier push &
pull on high pile
carpets and area
rugs.
NV350Q_26_IB_ENG_101019.indd 11 10-10-19 9:19 AM