FUNCTIONAL DESCRIPTION
CAUTION:
•Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool.
001698
1
24
3
1.Base
2.Lever
3.Scale
4.Adjusting roller
001699
1
1. Switch lever
Adjusting bit protrusion
To adjust the bit protrusion, loosen the lever and move the tool base up or down as desired by turning the adjusting roller. After adjusting, tighten the lever firmly to secure the tool base.
Switch action
CAUTION:
•Before plugging in the tool, always be sure that the tool is switched off.
To start the tool, move the switch lever to the I (ON) position. To stop the tool, move the switch lever to the O (OFF) posi- tion.
The tools equipped with electronic function are easy to oper- ate because of the following features.
Constant speed control
Electronic speed control for obtaining constant speed. Possi- ble to get fine finish, because the rotating speed is kept con- stant even under load condition.
Soft start feature
Safety and soft start because of suppressed starting shock.
Lighting up the lamps
CAUTION:
•Do not see the source of light directly.
To turn on the lamp, move the switch lever to the “ON” side. Move the switch lever to the “OFF” side to turn it off.
6
