001713
001714
14
2
3
1. Adjusting screw
2. Clamp screw (B)
3. Trimmer guide
4. Clamp screw (A)
001715 |
2 |
1 |
3 |
1.Workpiece
2.Bit
3.Trimmer guide
MAINTENANCE
Trimmer guide
Trimming, curved cuts in veneers for furniture and the like can be done easily with the trimmer guide. The guide roller rides the curve and assures a fine cut.
Install the trimmer guide on the tool base with the clamp screw (A). Loosen the clamp screw (B) and adjust the dis- tance between the bit and the trimmer guide by turning the adjusting screw (1 mm (3/64”) per turn). At the desired dis- tance, tighten the clamp screw (B) to secure the trimmer guide in place.
When cutting, move the tool with the guide roller riding the side of the workpiece.
CAUTION:
•Always be sure that the tool is switched off and unplugged before attempting to perform inspection or maintenance.
12
