Finishing edges
To trim edges or make slight dimensional adjustments, run the blade lightly along the cut edges.
'Of | I For 4305 |
Metal cutting
Always use a suitable coolant (cutting oil) when cutting metal. Failure to do so will cause significant blade wear. The underside of the workpiece can be greased instead of using a coolant.
Plastic base plate
Use the plastic base plate when cutting decorative veneers, plastics, etc. It protects sensitive or delicate surfaces from damage. To replace the base plate, remove the four screws with the hex wrench.
Anti-splinteringdevice
To reduce the potential for workpiece sur- face splintering, the
ef Base
12
