Installingor removingthe saw blade
CAUTION:
Always be sure that the tool is switched off and unplugged before installingor removing the blade.
To install the blade, loosen the screw on
With the blade teeth facing forward, insert the blade into the blade holder as far as it will go. Make sure that the back edge of the blade fits properly in the groove of the roller. Then firmly tighten the screw to secure the blade.
1
P | Jig saw balde |
Screw.Roller
CAUTION :
*Always secure the blade firmly. Insufficient securing of the blade may cause blade breakage or serious injury.
Always clean out the blade holder before installingthe blade. Chips or foreign matter on the blade holder may cause insufficient securing of the blade.
*Use a lubricant or cutting oil between the blade and roller when cutting iron or com- position board, etc. Failure to do so will shorten the service life of your blade and roller or lead to potentially dangerous blade breakage.
6
