Guide rule (rip fence; optional accessory)
When cutting widths of under
150
mm
(5-29/32")
repeatedly, use of the guide
rule will assure fast, clean, straight cuts.
To
install
it,
loosen the bolt on the front of
the base. Slip in the guide rule and secure
the bolt.
Circular guide (optional accessory)
Use of the circular guide insures clean,
smooth cutting of circles under
200
mm
(7-7/8")
in radius. Insert the pin through
the center hole and secure
it
with the
threaded knob. Move the base of the tool
fully forward. Then install the circular
guide on the base in the same manner
as
the guide rule (rip fence).
Vacuum head (optional accessory)
The vacuum head
is
recommended to per-
form clean cutting operations. Install the
plastic cover on the tool by fitting
it
into
the notches in the tool.
Guiderule-
u Pin
Fit into notches
Base
Plastic cover
13