IMPORTANT
SAFETY INSTRUCTIONS
(For All Tools)
WARNING: WHEN USING ELECTRICTOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, AND PERSONAL INJURY, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS.
1.KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.
2.CONSIDER WORK AREA ENVIRONMENT. Don’t use power tools in damp or wet locations. Keep work area well lit. Don’t expose power tools to rain. Don’t use tool in presence of flammable liquids or gases.
3.KEEP CHILDRENAWAY. All visitors should be kept away from work area. Don’t let visitors contact tool or extension cord.
4.STORE IDLE TOOLS. When not in use, tools should be stored in dry, and high or
5.DON’T FORCETOOL. It will do the job better and safer at the rate for which it was intended.
6.USE RIGHT TOOL. Don’t force small tool or attachment to do the job of a heavy- duty tool. Don’t use tool for purpose not intended.
7 . DRESS PROPERLY. Don’t wear loose clothing or jewelry. They can be caught in moving parts. Rubber gloves and
8.USE SAFETY GLASSES. Also use face or dust mask if cutting operation is dusty.
9.DON’T ABUSE CORD. Never carry tool by cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and sharp edges.
10.SECUREWORK. Use clamps or a vise to hold work. It’s safer than usingyour hand and it frees both hands to operate tool.
11.DON’T OVERREACH. Keep proper footing and balance at all times.
12.MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better and safer performance. Follow instructions for lubricating and changing accessories. Inspect tool cords periodically and if damaged, have repaired by authorized ser- vice facility. Inspect extension cords periodically and replace if damaged. Keep handles dry, clean, and free from oil and grease.
13.DISCONNECT TOOLS. When not in use, before servicing, and when changing accessories, such as blades, bits, cutters.
2
